The Mini Dual Mute is a 1U 14HP, dual channel vactrol based mute module. The MQM features 2 mono signal paths, with one vactrol per channel. The MQM is perfect for muting all signal types found within a Eurorack System, with both of its inputs being cascaded. If no cable is patched into “In 1” a 10V (10 Volt) signal will be outputted.
 
The MDM can be directly controlled via both of its buttons (one for each channel). Both buttons allow for both latching and momentary functionality. If a button is short pressed its respective channel will latch between a muted or unmuted state. When a button is long pressed, the channel's momentary mode is activated, lasting until the button is released. This is fantastic for using the MQM during live performances. Through the use of a DIP switch on the rear of the module, you can choose how each state is displayed via the LED buttons, rather than it being prescribed to you. By default when a channel is unmuted its respective LED will be illuminated, and off when the channel is muted. Through changing the position of the DIP switch, an illuminated LED will indicate a channel being muted, and an LED that is off indicates a channel being unmuted.

The MDM also features the ability to detect the difference between both Gate and Trigger signals, and change its functionality based on the signal that is sent to the module, via its 2 “G/T” inputs. If the MDM detects a Trigger signal on one of its “G/T” inputs, the respective channel will latch between either a muted or unmuted state. If a Gate is detected the respective channel will momentarily latch to an unmuted state until the Gate ends. This functionality mirrors that of the integrated LED buttons, allowing you to mute signals the way you want to. This also allows you to sequence each channel.

All Fully Wired Electronics modules come with Aluminum front panels and Knurlies for mounting. All FWE 1U modules come with both interchangeable Intellijel and Pulplogic 1U panels.